Show simple item record

dc.contributor.authorBo, P.
dc.contributor.authorBarton, M.
dc.description.abstractWe propose a path-planning algorithm for 5-axis flank CNC machining with general tools of varying curvature. Our approach generalizes the initialization strategy introduced for conical tools [Bo et al., 2017] to arbitrary milling tools. Given a free-form (NURBS) surface and a rotational milling tool, we look for its motion in 3D to approximate the input reference surface within a given tolerance. We show that for a general shape of the milling tool, there exist locally and generically four 3D directions in which the point-surface distance follows the shape of the tool up to second order. These directions form a 3D multi-valued vector field and its integration gives rise to a set of integral curves. Among these integral curves, we seek straight line segments that correspond to good initial positions of the axes of the milling tool. We validate our method against synthetic examples with known exact solutions and, on industrial datasets, we detect approximate solutions that meet fine machining tolerances. We also demonstrate applicability of our method for efficient flank milling of convex regions that is not possible using traditional conical tools.en_US
dc.rightsReconocimiento-NoComercial-CompartirIgual 3.0 Españaen_US
dc.subject5-axis CNC machiningen_US
dc.subjectflank millingen_US
dc.subjectfree-form surfaceen_US
dc.subjecttangential movabilityen_US
dc.subjectgeneral milling toolen_US
dc.titleOn initialization of milling paths for 5-axis flank CNC machining of free-form surfaces with general milling toolsen_US
dc.journal.titleComputer Aided Geometric Design (CAGD, Elsevier)en_US

Files in this item


This item appears in the following Collection(s)

Show simple item record

Reconocimiento-NoComercial-CompartirIgual 3.0 España
Except where otherwise noted, this item's license is described as Reconocimiento-NoComercial-CompartirIgual 3.0 España